Hilti 1000 Medium/Heavy Breaker 110-v
£124.00
The Hilti 1000 medium / heavy breaker is a powerful breaker, good for breaking out
• Concrete
• Asphalt
• Screeds
Tile lifter for taking up ceramic tiles.
Bits (tools) supplied with this machine are point, chisel and / or bolster.
Weekly hire rate. If you can bring back this hire item early, then we can offer the following price reduction:
- 1 day hire: 40% reduction.
- 2 days hire: 20% reduction.
Discounts available to contractors with an approved trade account. Trade account form.
Terms and Conditions of Hire
Discounts available to contractors with an approved trade account. Trade account form.
- Description
- Additional information
- Instructions
Description
Hilti 1000, 110v medium breaker is a powerful. Using different accessories this machine can be used for a multitude of jobs. These include removing failed floor coatings, breaking out concrete – up to 4 inches / 10 cms, removing vinyl and ceramic tiles with optional tile lifter blade.
The medium breaker produces up to 26J of impact energy. We supply bits with this machine, point, chisel and bolster and charge a single sharpening charge of £2.00 per bit taken.
Rates quoted are for one week. After a week a 25% daily charge is applied on days 8, 9 and 10 and then a full 2nd week’s hire charge is applied.
FAQs –
Q – What is the maximum depth that this breaker will go down to? A- Approximately 12.5 cms / 5 inches. This is a rough guide and dependant upon the make up and condition of the concrete.
Q – What PPE should I wear when using the heavy breaker? A- Ear defenders, dust mask, safety specs and work boots PPE . Please adhere to vibration limits .
Q – any hints and tips? A – Use the machine to dig vertically and do not attempt to lift broken concrete, otherwise you risk snapping the tool. Don’t push too hard, allow the machine to do the work.
Q – Does this machine come with bits / tooling? A- Yes, but they are charged for separately on a monthly basis, rather than weekly.
Q – I only have 230-volt power available. Which transformer and leads are required? A – 3 Kva 16-amp transformer and 16 amp 110-v leads (maximum number, 3).
About Multi-Hire
Multi-Hire, the local flooring hire shop with nationwide, next day UK delivery. We stock for hire, floor grinders, screed & resin mixers, floor lifters, shot blasters and floor scabblers. We have it covered. Machines for preparation of floors for tiling, concrete polishing, screed or epoxy painting and concrete breaking. Our machines make the job much easier and improve the outcome.
Unsure what flooring equipment is right for you? Contact us and with over 30 years’ experience in the floor preparation hire industry we’ll give you the advice you need. Approved by Hire Association Europe Safe Hire Scheme and FERFA (resin and screed trade association) gives you confidence our standards do not drop.
Additional information
| Weight | 12.5 kg |
|---|
