GP3000 4 Head Diamond Floor Grinder National Flooring Equipment -0

Terrco GP3000 4 Head Diamond Floor Grinder (1 week hire rate)

GP3000 4 Head Diamond Floor Grinder National Flooring Equipment -0

Terrco GP3000 4 Head Diamond Floor Grinder (1 week hire rate)

£1,100.00

In stock

£1,100.00

The GP3000 4 headed diamond floor grinder and polisher, grinds or scratches up coatings on large and medium sized concrete floors and is also able to polish bare concrete floors. We have a range of tooling for a multitude of purposes.

Weekly hire rate. If you can bring back this hire item early, then we can offer the following price reduction:

  • 1 day hire: 40% reduction.
  • 2 days or weekend hire: 20% reduction.

Discounts available to contractors with an approved trade account. Trade account form.

Terms and Conditions of Hire
Clear

Description

Large concrete floor grinder to hire.  The GP3000 grinding & polishing machine is unmatched in quality and durability. This robust machine is designed to run through medium and large areas grinding down or scraping up coatings at an impressive rate.

It has easy to use variable speed control and easy, comfortable operation. The contra-rotating heads leave a high quality surface without any swirl marks. Its direct drive makes it a 3 phase machine suitable for use with PCD scraping up shoes for removing failed coatings and old surfaces. Please call us to discuss the range of tooling that can be supplied with this machine.

Please note that this machine requires a 63 amp 5 pin 415 volt power supply and an additional 32 amp socket to power the dust control unit; needs to be Husqvarna D60 or above.

GP3000 4 Head floor grinder, grinding concrete slab

GP3000 4 Head floor grinder, grinding concrete slab” width=

 

How to use the Terrco 2000/3000

How to use the Terrco 2000/3000” width=

Find a range of accessories here!

Rates quoted are for one week. After a week a 25% daily charge is applied on days 8, 9 and 10 and then a full 2nd week’s hire charge is applied.

FAQs

Q – What applications does the Terrco GP 3000 tackle? A – Floor grinding and coatings removal.

Q – Can you use PCDs on the Terrco GP 3000 for coatings removal? Yes, however you have to buy them, rather than hire them. Diamond grinding shoes can be hired by the mm used.

Q – What power is required to run this machine? A – A 3-phase, 415-v, 63 amps, 5 pin socket, with neutral connected. You will need two sockets, a 63 amp and a 32 amp to power the dust control unit. Note: do not use a drop down whip lead; this machine requires 63 amps and to use less will result in a power shortage which will burn the motor out.

Q – Which vacuum dust control unit is suitable for the Terrco GP 3000? This machine generates a substantial quantity of dust and so a large 3-phase dust control unit is required. We recommend the Husqvarna HTC 80 D or larger.

About Multi-Hire

Multi-Hire, the local flooring hire shop with nationwide, next day UK delivery. We stock for hire, floor grinders, screed & resin mixers, floor lifters, shot blasters, concrete edge grinders and floor scabblers. We have it covered.  Machines for preparation of floors for tiling, concrete polishing, screed or epoxy painting. Our machines make the job much easier and improve the outcome.

Unsure what flooring equipment is right for you?  Contact us and with over 30 years’ experience in the floor preparation hire industry we’ll give you the advice you need.  Approved by Hire Association Europe Safe Hire Scheme and FERFA (resin and screed trade association) gives you confidence our standards do not drop

Additional information

Weight 646 kg
Drive

Push Along, Self Propelled