Description

Concrete floor polisher grinder hire, the HTC 500 is the medium sized polisher/grinder in our range. This floor grinder polisher is variable speed, so it can be used for both polishing and/or floor grinding. It can grind or polish a wide range of surfaces including concrete, screed terrazzo, marble plus much more. This machine has a revolving 22” (55 cms) head fitted with 3 plates each with 3 diamond shoes spinning in the opposite direction to the main head for a flawless finish without swirl marks.

It has easy to use controls and an adjustable handle for ease and comfort. It has a 50 mm dust outlet to connect directly onto a dust control unit. Diamond shoes can be purchased or hired on a wear charge basis. Please contact us for details.

We ask that you do not use PCD or T-Rex substance removal shoes with this concrete floor grinder. Requires a 415 v 3 phase, 32 amp 5 pin socket.

Rates quoted are for one week. After a week, a 25% daily charge is applied on days 8, 9 and 10 and then a full 2nd week’s hire charge is applied. Unsure we have a full range of concrete floor grinders to hire.

YouTube Videos for HTC 500 Concrete Floor Grinder

HTC 500 removing old coverings

FAQs

Q – What’s the benefit of variable speed over single speed? A – If you are just preparing a floor, grinding down a residue or keying / roughing up a too smooth surface to enable a later product to bond, there is no benefit. Variable speed is essential if you are polishing the surface with ever finer grits of grinding shoes or discs.

Q – Which is the most suitable vacuum dust control unit for this floor grinder. A – We recommend the 110-v 3 motor dust control unit with either the bin system or Longopac system.

Q – What power supply does this floor grinder require? A – 3-phase, 32-amps, 415-v, 5 pin with the neutral connected, the white box on the wall with a red socket. In the absence of a supply, you will need to hire a 24 Kva generator or higher. Note, if you are wanting to power both the floor grinder and dust control unit from the generator, a 40 Kva set will be required.

Q – Which tool holders do I need? A – Depends on what application you are undertaking. The default holders are the standard ‘knock on’ or EZ toll holders (floor grinding or PCDs). Upon request, we can supply Fenix (concrete polishing) or Velcro (concrete polishing and wood sanding).

Q – what diamond grinding shoes / tooling is required to use with this floor grinder? A – We can hire you 16 (aggressive), 30 (general purpose) or 80 (fine) grit shoes on a mm wear basis. Alternatively, we can sell to you the above as well as a range of polishing shoes and pads.

About Multi-Hire

Multi-Hire, the local flooring hire shop with nationwide, next day UK delivery. We stock for hire, concrete floor grinders, screed & resin mixers, floor stripper, shot blasters and floor scabblers. We have it covered.  Machines for preparation of floors for tiling, concrete polishing, screed or epoxy painting and concrete breaking. Our machines make the job much easier and improve the outcome.

Unsure what flooring equipment is right for you?  Contact us and with over 30 years’ experience in the floor preparation hire industry we’ll give you the advice you need.  Approved by Hire Association Europe Safe Hire Scheme and FERFA (resin and screed trade association) gives you confidence our standards do not drop.

Additional information